How to install keystone classic wheels and tires

## How to Install Keystone Classic Wheels and Tires

Installing Keystone Classic wheels and tires is a relatively simple process that can be completed in a few hours with the right tools and materials. Here are the steps involved:

### Tools and Materials

Keystone Classic wheels and tires
Lug wrench
Jack
Jack stands
Torque wrench
Tire gauge
Tire sealant (optional)

### Step-by-Step Instructions

#### 1. Safety First

Before you begin, it is important to take safety precautions. Park your vehicle on a level surface and engage the parking brake. Place wheel chocks behind the wheels that will not be removed.

#### 2. Remove the Old Wheels and Tires

Use the lug wrench to loosen the lug nuts on the wheels you are removing. Do not remove them completely at this point.
Place the jack under the frame of the vehicle near the wheel you are removing.
Slowly raise the vehicle until there is approximately 6 inches of clearance between the ground and the tire.
Use a jack stand to support the vehicle. This will prevent it from falling if the jack fails.
Finish removing the lug nuts and take off the wheel.
Repeat this process for the other wheels you are removing.

#### 3. Install the New Keystone Classic Wheels

Place the new Keystone Classic wheel onto the wheelbase.
Thread the lug nuts onto the wheel studs by hand.
Tighten the lug nuts using the torque wrench. The recommended torque setting for Keystone Classic wheels is 100 ft-lbs.
Lower the vehicle until the tire touches the ground.

#### 4. Install the New Keystone Classic Tires

Position the new Keystone Classic tire over the wheel.
Use a tire iron to pry the tire bead over the wheel rim.
Once the tire bead is completely seated, use the tire gauge to inflate the tire to the recommended pressure.
Repeat this process for the other tires.

#### 5. Final Checks

Double-check the tightness of all lug nuts.
Check the tire pressure again after driving for a few miles.
Apply tire sealant to the tires if desired.
Enjoy your new Keystone Classic wheels and tires!

### Tips

It is a good idea to clean the wheelbase and wheel studs before installing the new wheels. This will help to ensure a secure fit.
If you are not comfortable installing the wheels and tires yourself, you can always have it done by a professional mechanic.
Keystone Classic wheels and tires are available in a variety of sizes and styles. Choose the ones that best suit your vehicle and your personal preferences.
With proper care and maintenance, your Keystone Classic wheels and tires will last for many years.

### Conclusion

Installing Keystone Classic wheels and tires is a straightforward process that can be completed in a few hours. By following the steps outlined in this guide, you can ensure a safe and successful installation.