How to raise 2014 jeep wrangler wheels and tires recommended

## How to Raise 2014 Jeep Wrangler Wheels and Tires: A Comprehensive Guide

### Introduction

The Jeep Wrangler is an iconic off-road vehicle known for its rugged exterior and impressive capabilities. One way to enhance these capabilities is by raising the vehicle’s wheels and tires. Raising the suspension allows for increased ground clearance, better obstacle clearance, and improved articulation for off-road adventures. This guide will provide a step-by-step process on how to raise 2014 Jeep Wrangler wheels and tires.

### Tools and Materials

Before embarking on this project, ensure you have the necessary tools and materials:

– Lift kit for 2014 Jeep Wrangler (choose a kit that corresponds with your desired lift height)
– Jack stands
– Socket wrench set
– Torque wrench
– Pry bar
– New wheels and tires (optional)

### Safety Precautions

Before beginning any work on your vehicle, always prioritize safety.

– Park the Wrangler on a level and stable surface.
– Engage the parking brake.
– Wear appropriate safety gear, including gloves and safety glasses.
– Never work beneath a vehicle supported by only a jack.

### Step-by-Step Instructions

1. Prepare the Vehicle

– Remove the lug nuts from all four wheels but do not remove the wheels yet.
– Position the jack stands at the designated jacking points on the Wrangler’s frame.
– Slowly raise the Wrangler until it is supported by the jack stands.
– Remove the lug nuts and wheels.

2. Install the Lift Kit

– Front Suspension:
– Remove the sway bar end links.
– Disconnect the track bar from the frame.
– Remove the bolts securing the front axle to the frame.
– Install the lift kit components as per the manufacturer’s instructions (this may include new springs, spacers, or control arms).
– Reinstall the axle, track bar, and sway bar end links.

Read More  What to do with old wheels and tires

– Rear Suspension:
– Remove the rear sway bar end links.
– Disconnect the rear track bar from the axle.
– Remove the bolts securing the rear axle to the frame.
– Install the lift kit components as per the manufacturer’s instructions (this may include new springs, spacers, or control arms).
– Reinstall the axle, track bar, and sway bar end links.

3. Install New Wheels and Tires (Optional)

If you have purchased new wheels and tires, this is the time to install them.

– Mount the tires on the new wheels and balance them properly.
– Position the new wheels and tires on the vehicle and tighten the lug nuts by hand.
– Lower the Wrangler to the ground and remove the jack stands.
– Use the torque wrench to tighten the lug nuts to the specified torque.

4. Alignment

After raising the Wrangler, it is crucial to have the alignment checked and adjusted at a reputable auto repair shop. This ensures optimal tire performance, safety, and handling.

### Lift Height Options

The desired lift height for your Wrangler will depend on your specific needs and preferences. Here are some common lift height options:

– 2-inch Lift: A 2-inch lift provides a noticeable increase in ground clearance while maintaining a comfortable ride quality. It allows for the installation of larger tires, typically up to 33 inches.
– 3-inch Lift: A 3-inch lift offers a more aggressive stance with improved off-road capabilities. It accommodates tires up to 35 inches and may require additional modifications to accommodate the taller tires.
– 4-inch Lift: A 4-inch lift is ideal for serious off-road enthusiasts who need maximum ground clearance and obstacle clearance. It allows for the installation of tires up to 37 inches but may require significant modifications to the suspension and other components.

Read More  How much do stock z71 tires and wheels weigh

### Conclusion

Raising the wheels and tires of a 2014 Jeep Wrangler is a rewarding project that enhances its off-road abilities. By following the steps outlined in this guide and selecting a lift kit that aligns with your needs, you can achieve both increased ground clearance and improved off-road performance. Remember to prioritize safety, consult the manufacturer’s instructions, and have the alignment checked and adjusted after completing the installation. Happy Jeepin’!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top