How to build car transmission extenser

## How to Build a Car Transmission Extender

### Introduction

A car transmission extender is a device that can be installed on a vehicle to increase the lifespan of the transmission. It is a relatively simple and inexpensive DIY project that can be completed in a few hours.

### Benefits of Using a Transmission Extender

There are several benefits to using a transmission extender, including:

Increased transmission lifespan: A transmission extender can help to extend the lifespan of the transmission by reducing the amount of wear and tear on the gears.
Improved performance: A transmission extender can improve the performance of the transmission by reducing friction and vibration.
Reduced fuel consumption: A transmission extender can help to reduce fuel consumption by improving the efficiency of the transmission.

### Materials Needed


Socket wrench set
Screwdriver set


Transmission extender kit
Steel plate
Bolts and washers
Hydraulic fluid

### Instructions

1. Prepare the Steel Plate

Cut a steel plate to the size of the transmission pan.
Drill four holes in the plate for the bolts.

2. Install the Transmission Extender

Remove the transmission pan.
Place the steel plate over the transmission pan.
Bolt the steel plate to the transmission pan.
Install the transmission extender kit according to the manufacturer’s instructions.

3. Add Hydraulic Fluid

Add hydraulic fluid to the transmission.
Check the fluid level and add more fluid as needed.

4. Replace the Filter

Remove the old filter.
Install the new filter.

5. Reinstall the Transmission Pan

Reinstall the transmission pan.
Tighten the bolts to the specified torque.

Read More  How to repair car manual transmission

6. Test the Transmission

Start the vehicle and shift through all of the gears.
Listen for any unusual noises or vibrations.
If everything is working properly, the transmission extender is installed correctly.

### Tips

Use a high-quality transmission extender kit.
Follow the manufacturer’s instructions carefully.
Use the proper tools for the job.
Be patient and take your time.

### Conclusion

A car transmission extender is a simple and inexpensive DIY project that can help to extend the lifespan of the transmission, improve performance, and reduce fuel consumption. By following these instructions, you can easily install a transmission extender on your vehicle.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top