How to jumpstart an automatic transmission car

How to Jumpstart an Automatic Transmission Car

Jumping a car with an automatic transmission is a simple process that can be completed in a few minutes. However, it is important to follow the steps carefully to avoid damaging your car.

Materials You Will Need

Jumper cables
Another car with a working battery
Gloves (optional)

Safety Precautions

Park both cars in a safe location.
Turn off the engines of both cars.
Engage the parking brakes on both cars.
Put both cars in neutral.

Step-by-Step Instructions

1. Connect the red positive (+) cable to the positive terminal on the dead battery. The positive terminal is usually marked with a red cap or a “+” sign.
2. Connect the other end of the red positive (+) cable to the positive terminal on the working battery.
3. Connect the black negative (-) cable to the negative terminal on the working battery. The negative terminal is usually marked with a black cap or a “-” sign.
4. Connect the other end of the black negative (-) cable to an unpainted metal surface on the frame of the dead car. Do not connect the cable to the negative terminal on the dead battery.
5. Start the engine of the working car and let it run for a few minutes. This will charge the dead battery.
6. Try to start the engine of the dead car. If the engine starts, let it run for a few minutes to continue charging the battery.
7. Disconnect the jumper cables in the reverse order that you connected them. Disconnect the black negative (-) cable first, then the red positive (+) cable.

Read More  What cars have the dps6 transmission

Tips

If the engine of the dead car does not start after a few attempts, there may be another problem with the car. Call a mechanic for assistance.
If you are not comfortable jumping a car yourself, you can call a tow truck or a mechanic for assistance.
Jumper cables can be dangerous if they are not used properly. Be sure to follow the instructions carefully and wear gloves if possible.

Additional Information

What is a dead battery? A dead battery is a battery that has lost its charge. This can happen for a variety of reasons, such as leaving the lights on or driving in cold weather.
What are jumper cables? Jumper cables are used to connect the battery of a working car to the battery of a dead car. This allows the working car to charge the dead battery.
What is a negative terminal? The negative terminal is the terminal on the battery that is connected to the ground.
What is a positive terminal? The positive terminal is the terminal on the battery that is connected to the positive side of the electrical system.

Frequently Asked Questions

Can I jumpstart an automatic transmission car with a manual transmission car? Yes, you can jumpstart an automatic transmission car with a manual transmission car. However, you need to be careful not to stall the manual transmission car.
Can I jumpstart a car with a bad alternator? No, you cannot jumpstart a car with a bad alternator. The alternator is responsible for charging the battery, so if it is not working, the battery will not be able to hold a charge.
Can I jumpstart a car with a dead starter? No, you cannot jumpstart a car with a dead starter. The starter is responsible for starting the engine, so if it is not working, the engine will not be able to start.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top