## How to Pour Transmission Fluid into a Car
Transmission fluid is a vital part of your car’s transmission system. It lubricates the gears and other moving parts, helps to cool the transmission, and prevents wear and tear. Over time, transmission fluid can become dirty or contaminated, which can lead to transmission problems. Therefore, it is important to check your transmission fluid level regularly and change it according to the manufacturer’s recommended intervals.
### Tools and Materials Needed
Transmission fluid funnel
Rags
Replacement transmission fluid
### Safety Precautions
Park your car on a level surface and engage the parking brake.
Allow the engine to cool down completely before starting to work on the transmission.
Wear gloves and safety glasses to protect yourself from hot fluid and sharp metal edges.
### Step-by-Step Instructions
1. Locate the Transmission Dipstick
The transmission dipstick is usually located on the side of the transmission or under the hood, near the engine. It is typically a metal rod with a handle on the end.
2. Remove the Dipstick
Pull the dipstick out of the transmission and wipe it clean with a rag.
3. Check the Fluid Level
Insert the dipstick back into the transmission and remove it again. The fluid level should be between the two marks on the dipstick. If the fluid level is low, you will need to add more fluid.
4. Clean the Dipstick
Wipe the dipstick clean with a rag again and insert it back into the transmission.
5. Remove the Transmission Fluid Access Plug
The transmission fluid access plug is usually located on the bottom of the transmission pan. Use a wrench to loosen the plug and remove it.
6. Install the Transmission Fluid Funnel
Insert the transmission fluid funnel into the access hole.
7. Add Transmission Fluid
Slowly pour transmission fluid into the funnel until the fluid level reaches the full mark on the dipstick.
8. Replace the Transmission Fluid Access Plug
Once the fluid level is correct, remove the transmission fluid funnel and screw the access plug back into place.
9. Check for Leaks
Start the engine and let it idle for a few minutes. Check under the car for any leaks. If you see any leaks, tighten the access plug or replace the gasket.
### Tips
Always refer to your car’s owner’s manual for the specific type of transmission fluid required.
Do not overfill the transmission. This can cause transmission problems.
Change your transmission fluid regularly according to the manufacturer’s recommended intervals.
If you notice any signs of transmission problems, such as slipping gears or difficulty shifting, have your transmission inspected by a qualified mechanic.
### Related Articles
How to Check Transmission Fluid
How to Change Transmission Fluid
What is Transmission Fluid?
### FAQs
Q: How often should I check my transmission fluid level?
A: You should check your transmission fluid level every time you change your oil.
Q: What are the signs of low transmission fluid?
A: The signs of low transmission fluid include slipping gears, difficulty shifting, and a burnt smell.
Q: Can I add transmission fluid to my car myself?
A: Yes, you can add transmission fluid to your car yourself. However, it is important to follow the instructions in this article carefully.